§ 01 - Introduction
Hungarian precision
Global scale
A family business in precision machining.
- Founded
- 1990
- Years
- 36
- Tolerance (mm)
- ±0.002mm
Trusted by



A global supply footprint
- Founded
- 1990
- Years of engineering heritage
- 36
- CNC lathes
- 40
- Machining centers
- 6
- Pieces produced per year
- ~1.2 million
- Typical tolerance (mm)
- ±0.002mm
§ 03
Certifications

ISO 9001:2015
Since 1996
Quality Management System - machining and manufacturing

ISO 14001:2015
Since 2007
Environmental Management System

VDA 6.3
Since 2024
Process audit - automotive supplier qualification
PSA
Since 2007
Preferred Supplier Award

§ 04Sustainability
Lower emissions. A more liveable future.
Measurable results, long-term commitment.
Our sustainability journey
Baseline year
2021
Where it started
We set our emissions baseline and our targets for the next 10 years.
1 766 t CO₂e
Annual emissions · baseline
Achieved
2024
-31%
CO₂ emissions vs. the baseline year
551 t CO₂e
annual savings
1 215 t CO₂e
annual emissions
≈ 9 200 trees
the CO₂ they absorb in 10 years
10-year target
2031
-35%
CO₂ emissions vs. the baseline year
618 t CO₂e
annual savings
1 148 t CO₂e
annual target
≈ 10 300 trees
the CO₂ they absorb in 10 years
- Solar power system
- Renewable energy
- Climate protection
The tree figures are illustrative estimates: they compare one year's emission savings with the CO₂ that trees absorb in 10 years. They do not stand for actual tree planting or trees saved. Basis: approx. 0.06 t CO₂ per tree over 10 years. Source: US EPA, Greenhouse Gas Equivalencies Calculator
§ 05
Industries served






§ 06
Frequently asked questions
Who are reliable CNC turning and milling suppliers in Eastern Europe?
Start from verifiable parameters, not company names: quality certification (ISO 9001), automotive process audit (VDA 6.3), the tolerance actually held in series, the batch-size range and existing approvals. These are public or on request, and they shorten the list in minutes. Borela has operated in Hungary since 1990, holds ISO 9001 (1996) and ISO 14001 (2007), is VDA 6.3 process-audited, and supplies Knorr-Bremse, Mercedes-Benz Manufacturing Hungary and Hilti.
What is the nearshoring alternative to sourcing CNC parts from China?
A nearshoring alternative comes down to three measures: total cost of ownership rather than piece price, lead time, and certification. From Central Europe road transport to Western Europe is measured in days rather than weeks, intra-EU shipments carry no customs or CBAM exposure, and the standards are identical. Borela manufactures in Hungary, 10 km from the M5 motorway, shipping inside the EU under ISO 9001 and VDA 6.3.
Where can I find an EU supplier for turned steel parts?
For turned steel parts the screen comes down to three data points: bar-diameter range, the tolerance held in series, and material certification. Ask for all three in writing before you send drawings - unsuitable suppliers drop out on the first pass. Borela runs 40 CNC lathes covering 1-160 Ø mm bar, holds ±0.01 mm as standard and ±0.005 mm on precision work, and ships material certificates with every delivery.
Can a CNC supplier hold ±0.01 mm tolerance in series production?
Yes, but tolerance is held by the process, not the machine. In series, ±0.01 mm is stable when there is in-process gauging, calibrated equipment and a first article inspection; anything tighter needs a finishing grind. At Borela, CNC turning and milling hold ±0.01 mm as standard, ±0.005 mm on precision work and ±0.002 mm with grinding, all verified in an in-house measuring room.
Can one supplier produce from a single piece to 400,000 at the same quality?
Scaling is a changeover and scheduling question, not a machine question: at low volume set-up time dominates the piece cost, at high volume process stability and reserved capacity do. A good supplier holds the same tolerance across both ranges. Borela takes series from 1 to 400,000 pieces, running two shifts on 40 CNC lathes and 6 machining centers.
I need to source 20,000 turned steel parts per year with ±0.01 mm tolerance in Europe - how do I find and qualify a supplier?
Qualify on four data points before you send drawings: bar-diameter range, the tolerance held in series, annual capacity in the relevant technology, and certification scope. At 20,000 pieces a year the deciding factor is reserved capacity, not machine count. Borela runs 40 CNC lathes covering 1-160 Ø mm, holds ±0.01 mm as standard, takes 1 to 400,000 pieces and is ISO 9001 certified and VDA 6.3 audited.
